Liebert D42CIS7018 Manual de usuario descargar pdf (Pagina 22)

Options—Installation

Figure 14 Full-height PDU mounting brackets

4.6 Install RPC

™

BDM

™

Mounting Brackets

The RPC BDM, used to monitor Liebert MPX and Liebert MPH PDUs, can be mounted on the Knurr

DCM’s aluminum frame or door. Mounting the RPC BDM on the frame requires a quarter-turn

fastener; mounting it on the door is done with two Phillips head screws ( see Figure 15).

Figure 15 RPC BDM mounting brackets and fasteners

Top or bottom of adjustable, full-

height PDU bracket, 4" wide.

Attaches to inner face of

horizontal aluminum frame

member at top or bottom of rack.

The ends attach to the

aluminum frame members

as shown above.

Top of inset, full-height

PDU bracket, 4" wide

Attaches to inner face of

horizontal aluminum frame

member at top of rack.

Bottom of inset, full-height

PDU bracket, 4" wide

Attaches to upper face of

horizontal aluminum frame

member at bottom of rack.

Top or bottom of fixed, full-height

PDU bracket. Ends are identical,

permitting use on either side of

the cabinet. 4" wide and 8-inch

wide brackets available)

Center depth support

must be removed

before installing this

type of bracket

RPC BDM

attaches here

Quarter-turn

fastener secures

RPC BDM

mounting

bracket to Knurr

DCM frame

Phillips head screws

secure RPC BDM

mounting bracket to

Knurr DCM door

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comentarios a estos manuales

Sin comentarios

Liebert D42CIS7018 Manual de usuario Pagina 22

Comentarios a estos manuales